Breedon

Breedon Group are the largest independent construction materials group in the UK. With a national network of nearly 200 ready mixed concrete plants from the South Coast to Scotland, they supply more concrete than any other company! Much of the aggregate for their liquid screeds come from their own quarries and are supported by their directly employed screed technologists, meaning quality flowing screed products all over the country.

Breedon’s range of free flowing, self compacting, liquid screed products can be formulated to suit almost any customer’s application. Their screeds are a combination of high-quality binder, specially selected sands, water and special additives where required. Designed to offer a smooth, flat and level surface for use in the vast majority of interior applications where a subsequent floor covering will be used.

Their range is delivered ready-mixed to sites and they offer both calcium sulphate and cementitious screed mixes to suit varied customer requirements and budgets. In limited locations they also have a handy mini mix service for awkward access sites and locations.


Breedon Flow Gypscreed

BREEDON Flow Gypscreed is a combination of high-quality binder, specially selected sands, water and special additives where required. Designed to meet the requirements of BS EN 13813, it offers a smooth, flat and level surface for use
in the vast majority of interior applications where a subsequent floor covering will be used.

  • Residential/Commercial/Retail/ Healthcare buildings, schools.
  • Bonded and un-bonded construction.
  • Timber frame buildings.
  • Concrete and steel frame.
  • Incorporation of electric or wet under-floor heating systems.
  • Only supplied to Approved Installers, ensuring a quality finish
  • Enhanced drying rates.
  • No vibration or compaction needed.
  • High recycled content and low embedded CO2.
  • Large areas can be completed in a relatively short period of time.
  • Low shrinkage risk.
  • Reduced thickness compared to traditional screeds.
  • Thermal advantages over conventional materials.
Datasheet Enquire

Breedon FlowScreed CS

BREEDON FlowScreed CS is a low shrink, free-flowing cementitious screed, designed to provide a smooth level surface prior to the application of the desired floor finish. It is suitable for floating, bonded and un-bonded flooring systems, including most under-floor heating systems and all residential/ commercial floors carrying pedestrian traffic as described within BS8204.

  • Residential/Commercial/Retail/ Healthcare buildings, schools.
  • Bonded and un-bonded construction.
  • Incorporation of electric or wet under-floor heating systems.
  • Timber, concrete and steel frame.
  • Thinner sections compared to traditional screeds.
  • Cover to under-floor heating can be reduced to a minimum thickness of 30mm
  • Can take foot traffic 48 hours after placing.
  • Can be applied in future wet rooms (bathrooms/showers)
  • Increased thermal advantages compared to traditional screeds.
  • Ease of installation through approved installers, ensuring a quality finish.
  • Can receive most types of floor coverings after 21 days.
  • Can be forced dried from 7 days.
  • Low shrinkage rate
  • Large floor areas in excess of 1000m2 can be installed within a day.
  • Self-placing, self-compacting material that will fully encapsulate under-floor heating pipes.
Datasheet Enquire

Approved Suppliers

Click on a manufacturer for product information